The transceiver is an important part of a fiber optics network and is used to convert electrical signals to optical (light) signals and optical signals to electrical signals. It can be plugged into or embedded into another device within a data network that can send and receive a signal.
FIBRAMERICA CWDM SFP+ transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW/ER/ZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are 18 center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 14 dB is offered. The transmitter section uses a CWDM multiple quantum well DFB/EML laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Type | Distance | Data Rate | Fiber | Wavelength | Interface | Temp. |
TL-SFP-10GCWDM-10 | 10KM | 10G | SMF | CWDM | Duplex LC | 0 ~ 70°C |
TL-SFP-10GCWDM-20 | 20KM | 10G | SMF | CWDM | Duplex LC | 0 ~ 70°C |
TL-SFP-10GCWDM-40 | 40KM | 10G | SMF | CWDM | Duplex LC | 0 ~ 70°C |
TL-SFP-10GCWDM-80 | 80KM | 10G | SMF | CWDM | Duplex LC | 0 ~ 70°C |
Reviews
There are no reviews yet.